morphology of polymer
英 [mɔːˈfɒlədʒi ɒv ˈpɒlɪmə(r)]
美 [mɔːrˈfɑːlədʒi əv ˈpɑːlɪmər]
n. 聚合物形态学
双语例句
- Advances in Research of the Phase Morphology Formation of Polymer Blends and its Theory
聚合物共混相态形成过程及其理论研究进展 - Some discussions were devoted to the characterization, thermal properties and morphology of the polymer, its future was also prospected.
讨论了此类聚合物的相关性能及其结构形态，并展望了此类聚合物的应用前景。 - Progress of crystallization morphology of polymer melt in shear field
剪切场下聚合物结晶形态学研究进展 - The defects of present mathematical models about phase inversion of immiscible polymer blends were pointed out. The concept of the model of energy ratio, which is an effective method to study phase morphology of immiscible polymer blends, was put forward.
指出了目前不相容聚合物共混体系相态反转数学模型的不足，提出了能量比模型的概念，认为这是研究不相容聚合物共混体系相态有效的方法。 - Study on the Identification Methodology of Submicro phase Morphology of Polymer Alloy
高分子合金亚微观相态表征方法的研究 - The negative conveying screw element has a marked effect on the morphology changes of polymer blends.
及向螺纹元件对共混物相态变化影响显著。 - The miscibility and morphology of polymer alloys of polystyrene/ poly ( cis-butadiene) were studied using small angle X-ray scattering and SEM.
采用X光小角散射法研究了聚苯乙烯/顺丁橡胶合金体系的相结构及相容性。 - Study of the Morphology of Polymer Network Formed in Liquid Crystal
液晶中形成的聚合物网络织构及形貌的研究 - Control of phase morphology of incompatible polymer blend systems is an important subject which has gained increasing attention in the recent years.
不相容聚合物共混体系的相形态控制是近年来日益受到人们关注的重要课题。 - Study of Morphology of Polymer-modified Mortar and Concrete
聚合物改性砂浆和混凝土的微观形貌 - Blend morphology of polymer at outlet of common screw element in co-rotating intermeshing twin-screw extruder ⅱ. Blend morphology computation
啮合同向双螺杆挤出机普通螺纹元件末端共混物的混合形态Ⅱ.混合形态的计算 - The processing technology will influence the morphology of resulted polymer.
材料的加工过程影响高聚物的聚集态结构。 - Morphology Control of Polymer Blend& Interfacial Pull-out of in Situ-formed Copolymers
聚合物共混物的相形态控制&原位共聚物的界面拔出 - Multi-Layers Switching Technology Morphology Modulation of Polymer Multilayer Films
多层交换技术聚合物多层膜的表面形貌调控 - The morphologies of composite latex particles were described, and the influencing factors, such as feed methods, monomer hydrophilicity, initiator, thermodynamics and kinetics on the morphology of composite polymer particles were summarized.
介绍了乳液复合微粒的形态结构，并对其形成的影响因素从加料方式、单体亲水性、引发剂、热力学和动力学等方面作了总结； - In olefin polymerization process, the macrostructure of the catalysts supports control the morphology of the polymer product, also affect the properties of both the catalysts and the product.
聚烯烃催化剂载体粒子的宏观形态在聚合过程中控制着聚合物产品粒子的宏观形态，并影响聚合催化剂的催化性能和聚合物产品性能。 - Solubility of supercritical carbon dioxide ( SC-CO_2) in polymer melts was reviewed, and then the effects of SC-CO_2 on the viscosity of melt, viscosity ratio and interfacial tension of polymer blends were summarized. The effect of SC-CO_2 on morphology of polymer blends was briefly introduced.
概述了超临界二氧化碳（SC-CO2）在聚合物熔体中的溶解度，SC-CO2对熔体黏度和共混物两相间黏度比以及界面张力的影响，介绍了SC-CO2对聚合物共混物微观形态的影响。 - Morphology Modulation of Polymer Multilayer Films
聚合物多层膜的表面形貌调控 - Variation of the dispersed phase morphology of polymer blends in flow
流场中高分子共混物分散相的形态变化 - Particle morphology of polymer latex systems
聚合物乳液的粒子形态 - The influence of staggered angle of kneading block in melt conveying section on the phase morphology of incompatible polymer blends in a co-rotating twin screw extruder was studied.
对啮合同向双螺杆挤出机，将捏合盘置于熔体输送段，通过改变捏合盘错列角，研究双螺杆挤出过程熔体输送段捏合盘错列角对不相容体系共混物相态结构的影响。 - Study on Phase Morphology of Immiscible Polymer Blends Based on the Model of Energy Ratio
基于能量比模型的不相容聚合物共混体系相态研究 - Reactive Compatibilization and morphology control of polymer blends
聚合物共混物的反应性增容及相形态控制 - And the selection of thermal activation conditions can directly influence on the performances of supported catalysts of olefin polymerization and the morphology of polymer polymerized by polyolefin [ HJ70x] catalysts.
热活化条件的选择直接影响载体硅胶所制备催化剂的性能及生成的聚合物形态； - A new method for studying phase morphology of polymer blends and its applications in polymer blending
研究高聚物共混物相结构形态的新方法及其在共混研究中的应用 - The gradient phase morphology of polymer blends caused by temperature gradient during quiescent annealing process was studied. The influence of volume fraction of dispersed phase and interfacial tension on the gradient phase morphology was discussed.
研究了两相不相容聚合物共混物在静态退火时，由温度梯度引起的分散相尺寸的空间分布梯度相形态，讨论了分散相体积分数和两相之间界面张力对梯度形态形成的影响。 - Effect of Interfacial Tension on the Formation of the Gradient Morphology of Polymer Blends
界面张力对高分子共混物梯度相形态形成的影响研究 - Studying on Properties and Morphology of Polymer Ameliorated by Fiber-glass under Low-frequency Vibration Field
低频振动场对玻纤增强聚合物注射成型制品力学性能及其结构的影响研究 - Progress in Studies on Morphology of Composite Polymer Particles via Seeded Emulsion Polymerization
种子乳液聚合复合微粒形态的研究进展 - The morphology of polymer nanofibers are similar to ECM, and can supply a 3-D environment and more acceptor sites for cell adherence and growth.
聚合物纳米纤维在形态上类似于天然细胞外基质，可以为细胞的生长提供一个三维的空间和更多的黏附位点。